Pond Dechlorinators
As all fish keepers know it is necessary to remove chlorine and other impurities from tap water when introducing it to a pond or aquarium. Failure to do this can result in fish health problems and also adversely effects the growth of beneficial bacteria in all filters. The most common method of de-chlorination is to add chemical treatments to break down the chlorine.
The E.A. De-Tox range is a quick and simple method of filtering-out harmful chlorine and other impurities from tap water. Ideal for first fills, water changes and top-ups. No need to wait for the chlorine to "gas off", just fill up straight from the hose pipe.
The De-Tox de-chlorinator simply connects in-line to a hose pipe with standard hose fittings (supplied). The De-Tox carbon filter removes the toxins in tap water prior to it coming in to contact with your fish and filters.
- Highest grade activated carbon
- 100% fish safe
- Extremely high toxin removal rate
- Simple to use - straight out of the box
- Extremely economical - lowest cost per gallon of water treated
- Clean and 'no hassle' water changes via hose
- Can be used on a constant trickle feed
Installation
The filter can be used horizontally or vertically. Both ends can be used as either inlet or outlet points. Please observe the maximum flow rate recommended (2 gallons per minute) and drain after use before storage if being used temporarily and not as a permanent trickle. A lower flow rate will give better results and prolong the life of the product.
|
|
 |
|
|
|
|
|
|
|
|
