Online Koi ShopMcAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Items:
Value:
Koi Supplies Direct To Your DoorKoi Food special offersSummer SaleTel: 01704 231837

Opening Times: 8.30am to 4.30pm Mon-Fri
Koi Supplies direct to your door www.koi-fish.co.uk
 Home Up a Level Store Top Terms & Conds Search View Cart Checkout  Contact Us Login

Cloverleaf Bio Bed Fluidised Koi Pond Filters

Online Koi Shop | Koi Pond Filters  | Cloverleaf Koi Pond Filters | Cloverleaf Bio Bed Fluidised Koi Pond Filters |  Gravity Fed Fluidised Bed Filters (for pump fed filters)

Introduction To Fluidised Bed Filters
Pumped Installation: For guidance purposes this configuration is based upon a pumped supply to the main filter, with a secondary pump serving the FB unit. Return to pond is via a single pipe.

The dilemma of very high fish stocks overloading an existing filter system has frequently meant replacing the entire system or adding to it in a conventional manner, but often the case is that there is insufficient floor space (or finances) to execute either option. This is where the economical Fluidised Bed filter fully comes into its own, and providing that the existing system can adequately cater for mechanical filtration, then a vast improvement in water quality parameters will be evident.

The ability of Fluidised Bed filters to biological cater for extremely high level fish loads has been well documented, as have the wear and short life problems encountered by some companies producing such devices back in the year 2000. Only now in 2002 after considerable field and laboratory research can Cloverleaf offer the very best in FB’s – assisted greatly by the unique specification of silica sand used, and which is scientifically known to offer superior bacteria colonisation than that achieved by coral sand and other common types. Put into perspective, studies would indicate that the unique Cloverleaf biomass silica media has such impressive properties that 3kg will support the same volume of beneficial bacteria that might otherwise only be achievable if using 50 sacks of average filter rock or gravel.

Cloverleaf FB’s are manufactured in 3 varying sizes, and are available in two designs – (1) Pumped with gravity return (2) Pumped with pressurised return. Unlike some other manufacturers products the Cloverleaf range incorporates a non return valve to prevent the loss of sand via any siphoning actions.

As a guide to flow rates and application of use, approximately 10% of the ponds volume should be directed through the Fluidised Bed filter. By the nature of design and media used FB's should only be installed on existing mature ponds where adequate mechanical filtration also exists.
Pump Fed Fluidised Layout
Cloverleaf 2500 Bio Bed Filter

Cloverleaf 2500 Bio Bed Filter
Ref: M/25
The M25 gravity return FB unit will cater for heavy stocked ponds up to 2,500 gallons (11,250 litres), and is best served from a high pressure pump offering around 470gph (like Blagdons Amphibious P2000) - with final operational flow rates of around 250gph.
This unit is approx 600mm high (24") with a 110mm (4") diameter core containing 3kg of silica sand, together with standard 38mm (1.5") inlet pipe manifold including a Cloverleaf Side Valve on the inlet side, together with a non return valve.
Outlet/gravity return is for 50mm (standard 2") rigid pipework.
The M25 will support up to 50kg (110lb) of fish load.

More...

Price: £131.04 (Including VAT at 20%)



Cloverleaf 7000 Bio Bed Filter

Cloverleaf 7000 Bio Bed Filter
Ref: M/70
The M70 gravity return FB unit will cater for heavy stocked ponds up to 7,000 gallons (31,500 litres), and is best served from a high pressure pump offering around 830gph (like Blagdons Amphibious P4000) - with final operational flow rates of around 700gph.
This unit is approx 1000mm high (40") with a 110mm (4") diameter core containing 6kg of silica sand, together with standard 38mm (1.5") inlet pipe manifold including a Cloverleaf Side Valve on the inlet side, together with a non return valve.
Outlet/gravity return is for 50mm (standard 2") rigid pipework.
The M70 will support up to 100kg (220lb) of fish load.

More...

Price: £160.25 (Including VAT at 20%)



Cloverleaf 14000 Bio Bed Filter

Cloverleaf 14000 Bio Bed Filter
Ref: M/140
The M140 will both cater for heavy stocked ponds up to 14,000 gallons (63,000 litres). These impressive units are approx 2000mm high (80") with a 110mm core (4") containing 12kg of silica sand.
The M140 model requires a 1/4hp pump (similar to that used on the Cloverleaf Junior Pondvac) with an operational flow rate of around 1,400gph.

More...

Price: £254.48 (Including VAT at 20%)



Online Koi Shop | Koi Pond Filters  | Cloverleaf Koi Pond Filters | Cloverleaf Bio Bed Fluidised Koi Pond Filters |  Gravity Fed Fluidised Bed Filters (for pump fed filters)